• Compatible with UHS-II
• Eye-Fi cards and Multimedia cards (MMC) are not supported.

1. Self Cleaning Sensor Unit
   • Removes dust adhering to the low-pass filter.
   • At power off only / Enable / Disable. Performed automatically (taking about approx. 2 sec. as indicated on the screen) or manually (taking about approx. 8 sec. as indicated on the screen).
   • After manually activated cleaning, the camera will automatically restart (Power OFF to ON).
   • When [Multi Shot Noise Reduction], [Multiple exposures], or [HDR mode] is set, [Clean now] and [Clean manually] cannot be selected.
2. Dust Delete Data acquisition and appending
   • The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images.
   • The dust coordinate data appended to the image is used by the EOS software to automatically erase the dust spots.
   • Not available with RF-S/EF-S lenses, in cropped shooting, during focus bracket shooting, in FAW burst mode, or multiple-exposure shooting.
3. Manual cleaning (by hand)

1. File numbering methods
   • Continuous numbering
     • The numbering of captured images continues even after you replace the card.
   • Auto reset
     • When you replace the card, the numbering will be reset to start from 0001. If the new SD card already contains images, the numbering will continue from the last recorded image in the card.
2. Manual reset
   • Resets the file number to 0001, and creates a new folder automatically.

1. Auto
2. Standard
3. Portrait
4. Landscape
5. Fine Detail
6. Neutral
7. Faithful
8. Monochrome
9. User Defined 1-3
   • In Scene Intelligent Auto, [Auto] will be set automatically.
   • [Standard] is the default setting for [User Def. 1-3].

1. Auto (Ambience priority/White priority)
2. Day Light
3. Shade
4. Cloudy*1
5. Tungsten light
6. White fluorescent light
7. Flash
8. Custom (Custom WB)
9. Color temperature*2

1. Maximum burst
2. Possible shots/Sec. until self-timer shoots
3. Focus Bracketing/ Multiple-exposure/HDR shooting/Multi Shot Noise Reduction/Bulb time/Interval timer
4. Shooting mode
5. AF method
6. AF operation
7. Image quality
8. Card
9. Drive mode
10. Metering mode
11. No. of remaining shots for focus braketing, multiple exposures, or interval timer
12. Electronic level
13. Movie recording time available
14. Battery level
15. Image Stabilizer (IS mode)
16. Histogram (Brightness/RGB)
17. Quick Control button
18. Anti-flicker shooting
19. White balance/White balance correction
20. Picture style
21. Auto Lighting Optimizer
22. Still photo cropping / Aspect ratio
23. AF point (1-point AF)
24. AEB/FEB
25. View Assist
26. HDR PQ
27. Flash ready / FE lock / High-speed sync
28. Electronic shutter
29. Touch shutter / Create folder
30. AE lock
31. Shutter speed / Multi-function lock warning
32. Aperture value
33. Wi-Fi® function
34. Wi-Fi® signal strength
35. Bluetooth® function
36. Exposure simulation
37. Magnify button
38. ISO speed
39. Highlight tone priority
40. Exposure compensation
41. Exposure level indicator

• Spot AF
• 1-point AF
• Expand AF area: Above/below/left/right
• Expand AF area: Around
• Flexible Zone AF 1
• Flexible Zone AF 2
• Flexible Zone AF 3
• Whole area AF

• Auto
• People
• Animals (dogs / cats / birds / horses)
• Vehicles (motorsports cars or motorcycles / aircraft / trains)
  * Certain types of animals or vehicles may not be detected, depending on shape and appearance

1. Selects the eye closer to the camera (as detected from the angle of the face).
2. At the same distance from the camera, selects the eye closer to the center of the image.

1. Can be selected by touch.
2. Can be selected with the Multi-controller.

1. Evaluative metering (AF point-linked)
2. Partial metering (approx. 5.9% of the area at the center of the screen)
3. Spot metering (approx. 3.0% of the area at the center of the screen)
4. Center-weighted average metering

1. Scene Intelligent Auto
2. Hybrid Auto
3. Special Scenes
4. Creative Filters
5. Flexible-priority AE
6. Program AE
7. Shutter-priority AE
8. Aperture-priority AE
9. Manual Exposure
10. Bulb Exposure
11. Custom Shooting Modes C1, C2, C3

• For [Highlight tone priority], the settable ISO speed range will be ISO 200 to 102400.
• Expanded ISO cannot be set for HDR mode or during HDR PQ shooting.

1. Auto AE lock
   • AE is locked as soon as subjects are in focus using One-Shot AF when set to selected metering mode in [C.Fn2: AE lock meter. mode after focus].
   • User-set AE lock.
     • Use the AE lock button (update by pressing the button again) in Fv, P, Tv, Av, and M mode.
     • Enabled in all metering modes.9

1. Electronic first curtain
2. Mechanical shutter
3. Electronic shutter*

• Always on
• Only for shot (no stabilization in viewfinder/LCD screen between shots) Coordinated IS when used with Canon RF or RF-S lenses having optical Image Stabilization

• Anti-smudge coating applied.
• Anti-reflection coating not applied.

• View 1: Conventional Quick Control screen
• View 2: Cinema EOS-style Quick Control screen

1. Single image (select image)
2. Select range
3. All images in folder
4. All images on card
   • Image browsing and image search can be based on ratings.
   • Ratings-based image selections also possible with DPP.
5. All found images (only during image search)

1. Select images to erase
2. Select range
3. All images in folder
4. All images on card
5. All found images (only during image search)

• Images can be viewed, controlled, and received using a smartphone.
• Remote control of the camera using a smartphone is possible depending on the Camera Connect specifications.
• Images can be sent to a smartphone.
• NFC connection: Not supported
• Supported images: JPEG, HEIF, RAW/C-RAW, MP4 video files
• Transcoding while sending: Size to send (original / reduced size); Quality to send (original / compressed)

Customizable Buttons

• For PC communication
• Terminal type: USB Type-C
• Shared with terminal for in-camera charging with the USB Power Adapter PD-E1.
• In-camera Charging: Equivalent to USB type-C (5 V/1.5 A), but use should be restricted to USB Power Adapter PD-E1.

• Images can be displayed through the HDMI output and on screen at the same time.
• Images will not be displayed unless [NTSC] or [PAL] is properly set according to the video system of the TV set.

• With the AC Adapter AC-E6N + DC Coupler DR-E6, AC power is possible.
• With the USB Power Adapter PD-E1, in-camera charging of LP-E6NH is possible. The USB Power Adapter PD-E1 is not compatible with powering the camera.

• Remaining capacity percentage
• Shutter count, on current battery charge
• Recharge performance (batterys ability to hold charge; displayed in 3 levels)

• Based on CIPA testing standards.

85% or less